Honeywell HZ432 control board
DATS - Discharge Air Temperature Sensor. This device is mounted on supply air duct, the DATS senses the delivered air temperature and cuts off the heating or cooling when the delivered air temperature goes above or below normal operating limits. The sensor requires 2 wires to connect to the zone board. The two wires should be connected to the board's DATS connector. OT - Outdoor Temperature (sensor). This device detects the ambient temperature, directing the zoning panel when to switch to the auxiliary heat source based on a low balance point setting. The two wires should be connected to the board's OT connector. LED lights HZ432 Installation manual